Відео

Nicely done!!

I have a Hoyt torrex xt and have this sight. I have my vertical sight perfect but every time I shoot I’m consistently a little to the right and my sight doesn’t go any further to the right and I’m unsure on what to do.

If i did this setup, got my 60 yard groupings within 1 inch around the target. but when i go down to shoot 40 yards my groupings are all about 3-4 inches high. would that mean my fps sticker is incorrect? the 20 and 60 lined up great

My bow shop said in order to use the wheel on the fast Eddie, I’d have to change my anchor point. I thought this was weird since I just wanted to get 20 more yards out of my bow which is less than an inch of movement… is this true?

This is the only video I've seen on setting up the vertical pins. I had been questioning on how to set it up and wasn't sure if you where to start with the horizontal site then move to the vertical or what the process is no talks about it.

Great Video! Love my UV slider, been using Night Sight Tapes with it and I love the combo.

Ok so with the 3 pin indicator. If you have your bow sighted in have your sight tape on. If you dial say your second pin on the dial to 60 yards. Then that will hit 60. Ah damn trying make this question make sense. What im asking is dies it matter what pin you are using as long as said pin lines up with a distance on that wheel indicator?

What happens if I correct the 3rd at a down 45 but the uphill 45 is way off?

I just got my site in the mail. What size allen do i need for adjusting pin 2-3?

why not just attach the filter directly to the hose then fill the bag from the creek and filter as you drink?

Would the second pin be sighted in for 30?

Draw length so to short…..

I have a question about this sight that I’ve not found an answer in the comments to yet but hopefully I can make this clear. Does your third pin that you use for the floater move by itself or does the whole sight housing move so if the bottom pin is set to 40 and you adjust it to 50 does the top two pins stay at 20 and 30 or does the second pin move to 40 and the first moves to 30 hopefully I was able to explain that good enough. Thank You!

How far from the wall are you? Does thar matter?

Would this process work if sight is dialed all the way up? Also with this method shown to use sight as a normal 3 pin sight you just make sure that indicator is at 40 then you know your top two pins are 20/30?

Not sure if I got lucky but after I adjusted my second axis my third was right on

Do you need to do 3rd axis at full draw or could you just angle it in a bow vise?

Very informative, detailed review ! Thank You

It helped me to think of it this way - When using the dial, only use your floater. When using the three pins, with your housing in standard position, ignore the sight tape. Is that correct?

😊Is it NL 100% Edge to edage Sharpness same as EL or did u Fail again?😮

Doesn’t work with my prime RVX 32. Have to can’t the quiver so as to not hit the Hamskea. Any thoughts?

The simple fact that you offered your phone number made me subscribe. I've never seen anyone do that before. Awesome video. Thank you so much 🙏🙏🙏

Punching that trigger much lol … I used to be the same until I got into shot iq

Just bought one from this shop today they know there stuff very helpful and awesome price! Highly recommended to give s&s archery a call!

Just picked up the UV slider, I switched from an HHA tetra max, it’s an awesome sight but wanted to see what the slider is all about. I was a little confused about the sight in process for the slider and was having a little trouble with finding my elevation. But thanks to your video, my confusion was cleared up and I just have to get back outside and restart the sight in process for peace of mind. Thanks for making this video, it was well articulated and easy to follow. Plus you just gained a new follower. 🤙🤘🏻

What target is that?

Love the videos but this dudes draw cycle always looks just painful.

Nice sight - good review!

I love Hamskea rests , Im running 3 Epsilons , however , I think its cute how they say "micro launcher angle " to make it sound high end lol

Thank you so much for making this video! Even lands at the top of the google search!

Just did this. Super easy and mine was slightly off also. Now sight in but wait for Dr ok. Full hip replacement a week ago

Thanks Rob my LIFT finally arrived and was having issues with floater pin I’m my pro hunter HD and now I know !

Only 40x 😐

Nice draw 😅

They have no problem taking money from left handed shooters, but they have a problem spending the money to make an “as advertised” product for lefties… weird.

Did the blue dot pop off on the first 60yard shot? What were you aiming at then for your group?🤷‍♂️ I wish this sight allowed the 20 yard to be at the farthest roll up location. Allowing you to return to start without even having to look

Thank you sir!

"binos" "glassing"

Hi, nice video but I am a little confused. Why put the 40 yard mark on the sight tape next to needle indicator which is currently sitting at 20? if you do this, the needle indicator is set at 20 but the sight tape is showing 40. Shouldn't you be putting the 20 yard mark on the sight tape next to the needle indicator which is at 20?

When the top pin is and sight tape is at 20 percent, should the side micro dial with the number also be at 20?

How about the Hogg Father with that side micro adjustment on the big dial?

I like the spot hogg, the fibers are protected on the sight pins, I'd rip the fibers out on the BG elk hunting, which I have in the past, not good

Don't just talk just show some demo through it and prove clarity.

Thank you for the nice video. I was waiting to see a comparison between these two NLs. By any chance did you compare the NL 10x32 with these two? I have NL 8x42 and trying to decide one of NL x10.

I liked the 3 arrow quiver. It's unfortunate they don't make it anymore

So am i waiting my time sighting in all 3 pins before working on the calibration tape?

Being that TightSpot and Bowtech are owned by the same company. Are the Tight Spot AirLock Quiver and Bowtech CenterMass Quiver the same length? I haven't found a website that has the length of the quivers. (This video makes mention that the quiver is 15.5" long, while the S&S site shows 20.75") Their photos make the Bowtech CenterMass Quiver appear shorter.

Does it lock?

I had to order a tight spot quiver bracket for mine do get my quiver to mount properly to my bow!

This helped a lot.Thanks